Pressure Cleaning
We use pressure cleaning because it is a quick and thorough way of cleaning a large area very fast.
- Pressure Cleaning Concrete
- Pressure Cleaning Driveways
- Pressure Cleaning Roofs
- Pressure Cleaning Wood
- Cleaning Mildew
- Cleaning Mold
- Multi-Surface Restoration
But, before we get started there are a few key elements to consider. Most people are under the impression that all there is to it is PSI (pounds of pressure per square inch). But too much PSI can do more damage to the substrate than just clean and too little may not clean at all.
For example, we have all seen that too much pressure on a concrete driveway will leave us with a lot of sand at the curb, and too much pressure on a wood deck or fence will leave you with all the wood fuzzed up, which in return makes the wood crack and splinter in the near future.
The most adequate and thorough Tampa pressure cleaning is a good balance of PSI and GPM gallons per minute, add to this, an adequate cleaning solution.
We, the Tampa pressure cleaning contractors, and you the customer, have to realize that we have come to the end of the chemical era, it is time to go green to ultimately save ourselves and our environment.
A misconception exists that chlorine or bleach is needed to kill mold and mildew. But, to the contrary, the EPA reports that chlorine and bleach is only to be used on non porous surfaces, and is never adequate enough to kill mold and mildew, it only changes the color leaving the roots behind, therefore making it necessary to clean on a yearly basis.
Unlike many other Tampa pressure cleaning company’s, we do not just soak your home in bleach or chlorine and burn off the mold and mildew without actually killing it.
The way we were and the way we are, has to change, but change is hard especially in the pressure washing industry.
When we stop asking questions, we are no longer learning and that stops progress. Pressure cleaning contractors ask yourselves, do I like smelling of bleach every day, do I know what the toxins that my skin absorbs are going to do to my health? And do I want to keep paying for the replacement of people’s plants and lawns?
As our customer, would you like to know why you have to pressure clean your roof or concrete driveway every year? Which in effect does more damage to your home every year.
Today we are educating the Tampa pressure washing contractor and the customer that pressure cleaning is no longer necessary on a yearly basis. Today we have a cleaning and sealing treatment in place that no longer requires this destructive cycle. Our company uses a non-chlorine, non-bleach cleaner which actually kills mold and mildew on contact (yes even the root system) so that mold and mildew will not grow back after we are finished pressure cleaning. The second option for our customers is to apply a clear self cleaning treatment that will absolutely stop the reoccurrence of mold and mildew for the next seven years.
If you are considering Tampa pressure cleaning, Sarasota pressure washing, Clearwater pressure washing or Sun City pressure washing contact us today for a no pressure appointment. We urge everyone to investigate and together save money and our precious resources.
Let’s stop the pressure washing cycle! We provide cleaning services in Tampa, Sarasota, St.Pete, Clearwater, Pasedena, Lutz, Brandon, Lakeland, Bradenton, Largo, Palm Harbor and Sun City Center. Read more about Surface Protection.


The Dolphin Stadium has over 200,000 sq. ft. of the stadium coated with our Concrete & Pavers Sealer and they have not had to pressure wash the coated areas during the last 31 months when they would normally have had to pressure wash at least every 3 months or less to keep up with the algae & mold growth. Save water save the planet. With Florida now experiencing the worst shortage of potable water in its history, anything to stop using water is a very good thing.

Now everyone’s home, from their roof and their concrete & pavers to the vertical surfaces can now become a permanent oxidizing generator helping to reduce greenhouse gases. All of our cars, trucks, boats, motorcycles, R/V’s, ATV’s and any surface (including our windows) can now help to reduce greenhouse gases. Only SIMIX’s 2 Step Restoration, Protection & Maintenance System for home, office, and automotive, R/V, motorcycle and marine applications reduces greenhouse gases while all other automotive car waxes are contributing to greenhouse gases.




Surface Restorer
Price: $15.00
S & H: $10.35
To order please call
813-353-0010

Protector Plus
(Non-wax clear coating)
Price: $19.50
S & H: $10.35
To order please call
813-353-0010